Definition Of The Spindle Kinetics (Types 17 Through 24) - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
2.9.5

Definition of the spindle kinetics (types 17 through 24)

It is possible to control orthogonal spindles with three rotary axes.
TDATA1··TDATA12
Spindle dimensions.
All the parameters need not be set. The parameters to be defined for each spindle model
and their meanings are listed here below.
They may be defined with a positive or negative value. The (+) sign in the illustrations
indicates that the direction is assumed as positive, numbers 1st, 2nd and 3rd indicate the
rotation centers.
TDATA1
TDATA2
TDATA3
TDATA4
TDATA5
TDATA6
TDATA7
TDATA8
TDATA9
TDATA10
TDATA11
TDATA12
The main rotary axis is the rotary axis of the spindle that when it rotates it drags the other
two rotation axes. The secondary rotary axis is the rotary axis of the spindle that when it
rotates it drags one rotation axis. The third rotary axis is the rotary axis of the spindle that
when it rotates it does not drag any other rotation axis, only the tool.
It indicates the distance between the tip of the quill and the third rotation
center, the third rotary axis along the Z axis.
It indicates the distance of the spindle from the 1st rotation center to its fixture
on the machine along the X axis.
It indicates the distance of the spindle from the 1st rotation center to its fixture
on the machine along the Y axis.
It indicates the distance of the spindle from the 1st rotation center to its fixture
on the machine along the Z axis.
It indicates the distance from the 2nd rotation center to the 1st rotation center
along the X axis.
It indicates the distance from the 2nd rotation center to the 1st rotation center
along the Y axis.
It indicates the distance from the 2nd rotation center to the 1st rotation center
along the Z axis.
It indicates the distance from the 3rd rotation center to the 2nd rotation center
along the X axis.
It indicates the distance from the 3rd rotation center to the 2nd rotation center
along the Y axis.
It indicates the distance from the 3rd rotation center to the 2nd rotation center
along the Z axis.
It indicates the distance from the shaft of the tool to the 3rd rotation center
along the X axis.
It indicates the distance from the shaft of the tool to the 3rd rotation center
along the Y axis.
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·273·