Configure The Number Of Axes And Spindles Of The Channels - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
10.1.2

Configure the number of axes and spindles of the channels.

In a single-channel or multi-channel system, the axes and spindles defined in the system
must be distributed among the different channels. The axes and spindles of a channel are
configured using parameters CHNAXIS, CHAXISNAME, CHNSPDL and CHSPDLNAME.
The order the axes and spindles are defined in parameters CHAXISNAME and
CHSPDLNAME determines their index in the channel.
Parameter.
CHNAXIS
CHAXISNAME
CHNSPDL
CHSPDLNAME
A channel may have initially associated with it one, several or no of the axes defined in the
system. In any case, the number of axes assigned to the channel cannot be higher than the
number of axes of the system, defined by parameter NAXIS. The sum of the axes assigned
to the channels cannot exceed the number of axes of the system either. This is also valid
for the spindles.
Index of an axis or spindle in the channel.
As with the name, the index in the channel permits identifying the axis or spindle in PLC
variables, marks, etc.
The logic number of the axes and spindles is determined by the order in which they have
been defined in machine parameters CHAXISNAME and CHSPDLNAME. The index of the
first axis of the CHAXISNAME table will be ·1· and so on. The index of the first spindle of
the CHSPDLNAME table will be ·1· and so on.
CHAXISNAME
CHAXISNAME 1
CHAXISNAME 2
CHAXISNAME 3
Meaning.
Number of axes of the channel.
List of axes of the channel.
Number of spindles of the channel.
List of spindles of the channel.
CHSPDLNAME Index in the channel.
Axis with index ·1·.
Axis with index ·2·.
Axis with index ·3·.
CHSPDLNAME 1 Spindle with index ·1·.
CHSPDLNAME 2 Spindle with index ·2·.
10.
CNC 8060
CNC 8065
(R : 1709)
EF
·537·