Hbls Portable Operator Panel - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
2.7.4

HBLS portable operator panel.

HBLS
Activate the portable operator panel HBLS.
Possible values: Yes / No.
Default value: No.
Associated variable: (V.)MPMAN.HBLS
This parameter indicates whether there is a portable panel HBLS connected to the CNC
through the serial line or not. In order to be able to use the portable operator panel HBLS,
the serial line must be configured as RS422 (parameter RSTYPE). The portable operator
panel HBLS must not be considered when counting the handwheels of the system
(parameter NMPG).
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·247·