12.
12.2.2
CNC 8060
CNC 8065
(R
: 1709)
EF
·594·
(V.)MPG.VCOMPAXIS1[tbl]
(V.)MPG.VCOMPAXIS2[tbl]
(V.)MPG.VCOMPAXIS3[tbl]
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Volumetric compensation table [tbl]. Axis to be compensated.
Syntax.
·tbl·
Table number.
V.MPG.VCOMPAXIS2[1]
(V.)MPG.VCOMPFILE[tbl]
Variable to be read via interface.
The variable returns the value of block preparation.
Volumetric compensation table [tbl]. File containing volumetric compensation data.
Syntax.
·tbl·
Table number.
V.MPG.VCOMPFILE[1]
Variables. General modifiable signals.
(V.)PLC.VOLCOMP1
··
(V.)PLC.VOLCOMP4
Variable that can be read and written from the interface and read from the program.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
If the PLC activates one of these marks (changing it from 0 to 1), the CNC activates the
corresponding volumetric compensation (parameter VOLCOMP).
V.PLC.VOLCOMP1
V.PLC.VOLCOMP2
V.PLC.VOLCOMP3
V.PLC.VOLCOMP4
I n s ta ll a t io n ma n u a l.
Second axis to be compensated in the first volumetric
compensation table.
File for defining the first volumetric compensation.
Volumetric compensation ·1·.
Volumetric compensation ·2·.
Volumetric compensation ·3·.
Volumetric compensation ·4·.