Keyboard Configuration - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
2.11.4

Keyboard configuration.

USERKEY
Customizing the user key.
This table shows the parameters to configure the user key. The table has the following
machine parameters.
USERKEY
FUNCTION
COMPONENT
APPLICATION
FUNCTION
Function of the user key.
Possible values: Windows / Component / Application / CNC OFF / Nothing.
Default value: Nothing.
Parameter included in the USERKEY table.
Depending on the function selected, it is possible to carry out one of the following tasks.
Value.
Windows
Component
Appplication
CNC OFF
Nothing.
COMPONENT
Access a component of the CNC.
Possible values: Diagnosis / PLC / Machine parameters / DDSSETUP / TUNING
Parameter included in the USERKEY table.
This parameter shows the list of components (work modes) of the CNC that have no preset
key on the operator panel. Besides these components, it will also display the components
created with the tool FGUIM.
APPLICATION
Execute a PC application.
Parameter included in the USERKEY table.
When setting parameter USERKEY=Application, this parameter allows to select the
application The whole application path must be indicated; for example C:\CNC8070 \FAGOR
\ RELEASE \FGUIM.EXE.
CHANGEKEY
Customizing the change key.
This table shows the parameters to configure the change key. The table has the following
machine parameters.
CHANGEKEY
FUNCTION
SYSMENUMODE
SYSHMENU
SYSVMENU
Function of the user key.
Access a component of the CNC.
Execute a PC application.
Meaning.
Minimize the CNC and show the Windows screen.
Access a component (work mode) without CNC hotkey.
Execute an external application, for example the FGUIM.
It turns the CNC application off.
Disable the key.
Function of the change key.
Behavior of the system menu.
Horizontal system menu.
Vertical system menu.
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·309·