Configure The Subroutines - Fagor CNC 8060 Installation Manual

Hide thumbs Also See for CNC 8060:

Table of Contents

I n s t a l l a t i o n m a n u a l .

Subroutine associated with 8055-MC and 8055-TC programs

(subroutines 9998 and 9999).

In order to be able to execute programs of the 8055 MC/TC, the CNC must have two

subroutines called 9998 and 9999 written in 8070 CNC language. Each program in the

language of the 8055 MC/TC has a call to the corresponding subroutine at the beginning

and at the end.

Both subroutines must be defined, even if no operation is to be carried out at the beginning

or at the end of the part-program, in which case the subroutines will be empty (except for

the end-of-subroutine block). If any of these subroutines are missing, the CNC will issue an

error message every time when trying to execute a 8055-MC or 8055-TC part-program.

Configure the subroutines.

Name and location of the subroutine.

[CHN] ....... General machine parameter of the channel.

The name of the subroutines is 9998 and 9999. Both subroutines must be saved in the folder

path indicated by the general parameter SUBPATH. All channels use the same subroutines.

Routine that the CNC will execute at the beginning of each program

of the 8055-MC and 8055-TC.

Routine that the CNC will execute at the end of each program of the

8055-MC and 8055-TC.

This parameter indicates the directory, by default, for the user

subroutines and the necessary subroutines to execute 8055-

MC and 8055-TC programs.

Show Quick Links

Table of Contents