Changing The Set And The Gear At The Cnc And At The Drive - Fagor CNC 8060 Installation Manual

11.4.3
11.
CNC 8060
CNC 8065
(R : 1709)
EF
·570·

Changing the set and the gear at the CNC and at the drive.

A set is a bunch of parameters that may be activated and gear is a bunch of parameters
specifically related to gear ratios. The parameters that define the gear are included in the
set, one gear per set. A set change activates all its parameters, including those of the gear,
whereas a gear change only activates the specific gear-related parameters.
Axes and spindles included in a multi-axis group.
Function. CNC
G112 The CNC activates the programmed
set.
(axes only)
M41-M44 The CNC activates the programmed
set.
(spindles only)
(V.)A.SETGE.xn Not used.
If the axis or spindle does not belong to a multi-axis group, functions G112 and M41 to M44
act in the same way at the CNC; but at the drive they activate the programmed gear, not the
one defined in parameter DRIVESET.
Spindle and C axis.
Function. CNC
#CAX ON The CNC activates the set defined
in parameter CAXSET.
#CAX OFF The CNC restores the set that was
active before enabling the spindle
as C axis.
I n s ta ll a t io n ma n u a l.
Drive.
The drive activates the gear defined
in parameter DRIVESET of the
program set.
The drive activates the gear defined
in parameter DRIVESET of the
program set.
The drive activates the programmed
set and/or gear.
Drive.
The drive activates the gear
defined in parameter CAXSET.
The drive restores the gear that
was active before enabling the
spindle as C axis.