Subroutines Associated With M Functions - Fagor CNC 8060 Installation Manual

14.11
14.11.1 Configure the subroutines.
14.
14.11.2 Variables.
CNC 8060
CNC 8065
(R : 1709)
EF
·630·

Subroutines associated with M functions.

The "M" functions may have an associated subroutine that the CNC will execute instead of
the function. If, within a subroutine associated with an "M" function, the same "M" function
is programmed, the CNC will executed this, but not its associated subroutine.
Assign the subroutine to the function.
Parameter.
MPROGNAME FUNM
[FUNM] .... Machine parameters; M function table.
Name and location of the subroutine.
These subroutines must be defined in the "M" function table, in the MPROGNAME field and
saved in the folder ..\Mtb\Sub.
The following variables may be accessed from (PRG) the part-program and from the
MDI/MDA mode, PLC and (INT) from an external application. For each variable, the table
indicates whether the access is reading (R) or writing (W).
Variable.
(V.)MPM.MPROGNAME[pos]
Name of subroutine associated with M function.
Units: Text.
Syntax.
·pos· Position inside the "M" function table.
MPM.MPROGNAME[12]
Meaning.
Name of subroutine associated with M function.
Position ·12· of the "M" function table.
I n s ta ll a t io n ma n u a l.
PRG PLC INT
- - R