Fagor CNC 8060 Installation Manual page 615
Hide thumbs
Also See for CNC 8060:
- Installation manual (900 pages) ,
- Operating manual (502 pages) ,
- Translation of the original manual (180 pages)
Table of Contents
Advertisement
SUBROUTINES.
The CNC has a series of subroutines that must be defined depending on the configuration
of the machine (subroutine associated with a tool change, home search, etc.).
Subroutine.
Subroutine associated with
the start.
Subroutine associated with
the reset.
Subroutines associated with
the kinematics calibration
cycle.
Subroutines associated with
the tool calibration cycle.
Subroutines associated with
the part measuring cycle.
Subroutine associated with
program execution for the
8055 MC/TC.
Subroutine associated with
the tool change (function T).
Subroutine associated with
the tool change (function M6).
Subroutine associated with
function G74.
Subroutines associated with M
functions.
OEM subroutines associated
with functions G180 through
G189.
Channels: Subroutine per channel.
Path: ..\Users\Sub.
Channels: Subroutine per channel.
Path: ..\Users\Sub.
Channels: Subroutine common to all the channels.
Path: ..\Mtb\Sub.
Channels: Subroutine common to all the channels.
Path: ..\Mtb\Sub.
Channels: Subroutine common to all the channels.
Path: ..\Mtb\Sub.
Name: 9998 / 9999
Channels: Subroutine common to all the channels.
Path: General parameter SUBPATH.
Name: General parameter TOOLSUB.
Channels: Subroutine per channel.
Path: ..\Mtb\Sub.
Name: MPROGNAME parameters of the M function table.
Channels: Subroutine common to all the channels.
Path: ..\Mtb\Sub.
Name: General parameter REFPSUB.
Channels: Subroutine per channel.
Path: ..\Mtb\Sub
Name: MPROGNAME parameters of the M function table.
Channels: Subroutine common to all the channels.
Path: ..\Mtb\Sub.
Name: General parameter OEMSUB(G180) to OEMSUB(G189).
Channels: Subroutine per channel
Path: ..\Mtb\Sub.
14
CNC 8060
CNC 8065
(R
: 1709)
EF
·615·
Hide quick links:
Advertisement
Chapters
Table of Contents
