Volumetric Compensation Tables - Fagor CNC 8060 Installation Manual

2.3.16
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·90·

Volumetric compensation tables.

VOLCOMP
Volumetric compensations tables.
This parameter shows the volumetric compensation table. Volumetric compensations are
configured in the machine parameters and are activated from the PLC (marks VOLCOMP1
to VOLCOMP4).
VOLCOMP n
Configuration of volumetric compensation tables.
This parameter shows the parameter table to define the volumetric compensations of the
system. Each table has the following machine parameters to configure it.
VOLCOMP
VMOVAXIS1 In the basic volumetric compensation, the name of the axis
that generates variations when moved. No function in the
VMOVAXIS2
medium and large volumetric compensations.
VMOVAXIS3
NPOINTSAX1 Number of points of basic volumetric compensation on each
axis. No function in the medium and large volumetric
NPOINTSAX2
compensations.
NPOINTSAX3
INIPOSAX1 Initial position of the basic volumetric compensation on each
axis. No function in the medium and large volumetric
INIPOSAX2
compensations.
INIPOSAX3
INCREAX1 Interval between basic volumetric compensation points on
each axis. No function in the medium and large volumetric
INCREAX2
compensations.
INCREAX3
VCOMPAXIS1 Name of the first, second and third axis to be compensated.
VCOMPAXIS2
VCOMPAXIS3
VCOMPFILE File containing volumetric compensation data.
VMOVAXIS1
VMOVAXIS2
VMOVAXIS3
Name of the axis that generates variations when moved.
Possible values: Any axes defined in AXISNAME.
Associated variable: (V.)MPG.VMOVAXIS1[tbl]
Associated variable: (V.)MPG.VMOVAXIS2[tbl]
Associated variable: (V.)MPG.VMOVAXIS3[tbl]
Parameter included in the VOLCOMP table.
Axes that define the volume to be compensated. First, second and third axis that, when
moved, generates variations in the axes to be compensated. If it is a gantry axis, it is only
necessary to define the master axis; the CNC also applies the compensation to the slave
axis.
These parameters are only available for basic volumetric compensation; they have no
function in medium and large volumetric compensations. In the medium and large volumetric
compensations, the order of the axes is implicit in the file.
I n s ta ll a t io n ma n u a l.