Machine Parameters For The Magazine - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
2.10

Machine parameters for the magazine.

2.10.1 Tool magazine configuration.
NTOOLMZ
Number of tool magazines.
Possible values: From 0 to 4.
Default value: 1.
Associated variable: (V.)TM.NTOOLMZ
Number of system's tool magazines.
Although each channel has its own tool management, the tool magazines are not associated
with any particular channel. They are not associated with any particular spindle either.
GROUND
Ground tools are permitted (manual load).
Possible values: Yes / No.
Default value: No.
Associated variable: (V.)TM.MZGROUND[mz]
They are the ones not located in the magazine. When programming them, the CNC requests
them to be inserted in the spindle.
MAGAZINE n
Tool magazine table.
This parameter shows the tables to define the magazine data. Each table shows the following
machine parameters to configure it.
MAGAZINE n
STORAGE
MANAGEMENT
Parameters related to storage.
Magazine management related parameters.
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·299·