Configuration Of The Hsc Mode (Channel) - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
2.4.6

Configuration of the HSC mode (channel).

HSC
Parameter table of the HSC mode.
This parameter shows the table to define the HSC work mode.
HSC
HSCDEFAULTMODE
FEEDAVRG
MINCORFEED
CORNER
SMOOTHFREQ
HSCFILTFREQ
FASTFACTOR
FTIMELIM
FSMOOTHFREQ
FASTFILTFREQ
SURFFILTFREQ
FREQRES
SOFTFREQ
HSCROUND
ORISMOOTH
HSCDEFAULTMODE
Default mode when programming #HSC ON.
Possible values: SURFACE / CONTERROR / FAST.
Default value: SURFACE.
Associated variable: (V.)[ch].MPG.HSCDEFAULTMODE
Default mode to activate HSC machining.
FEEDAVRG
Calculating feedrate average.
Possible values: Yes / No.
Default value: Yes.
Associated variable: (V.)[ch].MPG.FEEDAVRG
This parameter enables the adjustment of the feedrate according to the block reading speed
and their size. This adjustment eliminates the need to slow down due to a poor supply of
small blocks; although as a result, the feedrate reached is lower, the overall machining time
will improve. The block reading speed depends on machine parameter PREPFREQ.
This parameter is only valid when the acceleration profile is trapezoidal or square sine
(parameter SLOPETYPE), that is the default acceleration profile for the HSC CONTERROR
mode.
MINCORFEED
Minimum feedrate at the corners.
Possible values: From 0 to 200000.0000 mm/min / from 0 to 7874.01575 inch/min.
Default value: 0.
Associated variable: (V.)[ch].MPG.MINCORFEED
This value should not be modified because it is possible to exceed the dynamics of the axes.
Modo por defecto al programar #HSC ON.
Calculating feedrate average.
Minimum feedrate at the corners.
Maximum angle of the corner to machine it in square corner mode.
Smoothing frequency in the interpolation.
Filter frequency (CONTERROR mode).
Default feedrate percentage (FAST mode).
Time difference permitted in feedrate interpolation (FAST mode).
Smoothing frequency in the interpolation (FAST mode).
Filter frequency (FAST mode).
Axis filter frequency (SURFACE mode).
First resonance frequency of the machine.
Path filter frequency for profiles of linear acceleration.
Default value of the maximum path error in HSC.
Orientation smoothing of the rotary axes working with RTCP.
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·127·