Configuration Of The C Axis - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
2.5.10

Configuration of the C axis.

CAXIS
Possibility to work as a C axis.
Parameter valid for rotary axes and spindles.
Parameter valid for analog drive, Sercos and simulated.
Possible values: Yes / No.
Default value: No.
Associated variable: (V.)[ch].MPA.CAXIS.xn
This parameter indicates whether the axis or spindle can work as C axis.
Plano de trabajo XC.
CAXSET
Set of parameters to work as C axis.
Parameter valid for rotary axes and spindles.
Parameter valid for analog drive, Sercos and simulated.
Possible values: From 1 to 4.
Default value: 1.
Associated variable: (V.)[ch].MPA.CAXSET.xn
The CNC takes this parameter into consideration only when CAXIS = Yes. This parameter
indicates which set of parameters (NPARSETS) the axis or spindle uses when it works as
C axis.
PERCAX
"C" axis kept active.
Parameter valid for rotary axes and spindles.
Parameter valid for analog drive, Sercos and simulated.
Possible values: Yes / No.
Default value: No.
Associated variable: (V.)[ch].MPA.PERCAX.xn
The CNC takes this parameter into consideration only when CAXIS = Yes. This parameter
indicates whether the CNC keeps the C axis active or not after executing M02, M30 or after
an emergency or reset. After turning the CNC off, the CNC deactivates the C axis.
X
C
Z
X
C
Plano de trabajo ZC.
2.
Z
CNC 8060
CNC 8065
(R : 1709)
EF
·165·