Lathe With 1 Channel, 3 Axes And 1 Spindle. Configuration Of Trihedron Type Axes - Fagor CNC 8060 Installation Manual

10.2.5
10.
CNC 8060
CNC 8065
(R : 1709)
EF
·544·
Lathe with 1 channel, 3 axes and 1 spindle. Configuration of trihedron
type axes.
The axes and spindles are distributed as follows.
Channel ·1·. 3 axes (X Y Z)
General configuration of the channels, axes and spindles.
System Channel ·1·
NCHANNEL = 1 GEOCONFIG = Trihedron
NAXIS = 3 CHNAXIS = 3
NSPDL = 1 CHNSPDL = 1
Configuration of the axes and spindles of the system.
AXISNAME Value
AXISNAME 1 X
AXISNAME 2 Y
AXISNAME 3 Z
SPDLNAME 1 S
Configuration of the axes and spindles of channel ·1·.
CHAXISNAME Value
CHAXISNAME 1 X
CHAXISNAME 2 Y
CHAXISNAME 3 Z
CHSPDLNAME Value
CHSPDLNAME 1 S
Plane selection in channel ·1·.
Function. Selected plane.
G17 X-Y plane. Perpendicular axis Z.
G18 Z-X plane. Perpendicular Y axis.
G19 Y-Z plane. Perpendicular axis X.
G20 Any plane and/or longitudinal axis.
With a trihedron-type-axis configuration, the planes behave in the same way as on a milling
machine except that the usual work plane will be G18 (if it has been configured like that in
parameter IPLANE).
1 spindle (S).
Logic order.
Logic number ·1·.
Logic number ·2·.
Logic number ·3·.
Logic number ·4·.
Index in the channel.
Axis with index ·1·.
Axis with index ·2·.
Axis with index ·3·.
Index in the channel.
Spindle with index ·1·.
I n s ta ll a t io n ma n u a l.
Index in the system.
Spindle with index ·1·.
Logic order.
Logic number ·1·.
Logic number ·2·.
Logic number ·3·.
Logic order.
Logic number ·4·.