10.2.7
10.
CNC 8060
CNC 8065
(R
: 1709)
EF
·546·
Lathe with 2 channels, 4 axes and 2 spindles. Configuration of "plane"
type axes.
The axes and spindles are distributed as follows.
Channel ·1·.
2 axes (X Z)
Channel ·2·.
2 axes (X1 Z1)
General configuration of the channels, axes and spindles.
System
Channel ·1·
NCHANNEL = 2
GEOCONFIG = Plane
NAXIS = 4
CHNAXIS = 2
NSPDL = 2
CHNSPDL = 1
IPLANE = G18
Configuration of the axes and spindles of the system.
AXISNAME
Value
AXISNAME 1
X
AXISNAME 2
Z
AXISNAME 3
X1
AXISNAME 4
Z1
SPDLNAME 1
S
SPDLNAME 2
S1
Configuration of the axes and spindles of channel ·1·.
CHAXISNAME
Value
CHAXISNAME 1
X
CHAXISNAME 2
Z
CHSPDLNAME
Value
CHSPDLNAME 1
S
Configuration of the axes and spindles of channel ·2·.
CHAXISNAME
Value
CHAXISNAME 1
X1
CHAXISNAME 2
Z1
CHSPDLNAME
Value
CHSPDLNAME 1
S1
Plane selection in channels ·1· and ·2·.
With this configuration, the work plane is always G18 and will be formed by the first two axes
defined in the channel. If the X (firs axis of the channel) and Z (second axis of the channel)
have been defined, the work plane will be the ZX (Z as abscissa and X as ordinate). Functions
G17 and G19 are not valid. Since there are only two axes, function G20 makes no sense.
1 spindle (S).
1 spindle (S1).
Channel ·2·
GEOCONFIG = Plane
CHNAXIS = 2
CHNSPDL = 1
IPLANE = G18
Logic order.
Logic number ·1·.
Logic number ·2·.
Logic number ·3·.
Logic number ·4·.
Logic number ·5·.
Logic number ·6·.
Index in the channel.
Axis with index ·1·.
Axis with index ·2·.
Index in the channel.
Spindle with index ·1·.
Index in the channel.
Axis with index ·1·.
Axis with index ·2·.
Index in the channel.
Spindle with index ·1·.
I n s ta ll a t io n ma n u a l.
Index in the system.
Spindle with index ·1·.
Spindle with index ·2·.
Logic order.
Logic number ·1·.
Logic number ·2·.
Logic order.
Logic number ·5·.
Logic order.
Logic number ·3·.
Logic number ·4·.
Logic order.
Logic number ·6·.