Lathe With 1 Channel, 3 Axes And 1 Spindle. Configuration Of "Plane" Type Axes - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
10.2.4 Lathe with 1 channel, 3 axes and 1 spindle. Configuration of "plane" type
axes.
The axes and spindles are distributed as follows.
Channel ·1·.
General configuration of the channels, axes and spindles.
System
NCHANNEL = 1
NAXIS = 3
NSPDL = 1
Configuration of the axes and spindles of the system.
AXISNAME
AXISNAME 1
AXISNAME 2
AXISNAME 3
SPDLNAME 1
Configuration of the axes and spindles of channel ·1·.
CHAXISNAME
CHAXISNAME 1
CHAXISNAME 2
CHAXISNAME 3
CHSPDLNAME
CHSPDLNAME 1
Plane selection in channel ·1·.
Function
G18
With a plane-type-axis configuration, the G18 plane is always active; in this case the ZX
plane. Functions G17 and G19 are not valid. Function G20 permits selecting the rest of the
axes (Y axis) as the axis for longitudinal compensation.
3 axes (X Z Y)
Channel ·1·
GEOCONFIG = Plane
CHNAXIS = 3
CHNSPDL = 1
IPLANE = G18
Value Logic order.
X Logic number ·1·.
Z Logic number ·2·.
Y Logic number ·3·.
S Logic number ·4·.
Value Index in the channel.
X Axis with index ·1·.
Z Axis with index ·2·.
Y Axis with index ·3·.
Value Index in the channel.
S Spindle with index ·1·.
Selected plane.
ZX plane Z axis for longitudinal compensation.
1 spindle (S).
Index in the system.
Spindle with index ·1·.
Logic order.
Logic number ·1·.
Logic number ·2·.
Logic number ·3·.
Logic order.
Logic number ·4·.
10.
CNC 8060
CNC 8065
(R : 1709)
EF
·543·