Configuration Of The C Axis - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
2.4.4

Configuration of the C axis.

CAXNAME
Default name of the C axis.
Possible values: Any valid axis name; X, X1··X9, ·· , C, C1··C9.
Default value: C.
Associated variable: (V.)[ch].MPG.CAXNAME
This parameter must be defined whenever there is an axis or spindle set as C axis.
When setting more than one C axis, use the program instruction #CAX to indicate the one
that is active. Only one C axis may be active in each channel.
ALIGNC
"C" axis alignment for diametrical machining.
Possible values: Yes / No.
Default value: Yes.
Associated variable: (V.)[ch].MPG.ALIGNC
This parameter indicates whether the tool can machine the whole surface diametrically in
a single run (ALIGNC = No) or the "C" axis must be aligned (ALIGNC = Yes).
ALIGNC
Yes.
No.
Meaning.
(1) Machining up to the center.
(2) Rotate the "C" axis 180°.
(3) Resume machining by moving the tool back.
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·125·