Subroutine Associated With Function G74 - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .

14.10 Subroutine associated with function G74.

Function G74 (machine home search) can be programmed in 2 ways, either by indicating
the axes and the order in which the axes are referenced or by programming only G74 (without
axes). When executing a block that only contains the G74 function (without axes), it calls
the subroutine associated with this function. This subroutine must contain the axes and the
order in which the axes and the spindle must be referenced.
This subroutine is also called when homing the axis in JOG mode without selecting the axes.
14.10.1 Configure the subroutines.
Assign the subroutine to the function.
Parameter.
REFPSUB
[CHN] ....... General machine parameter of the channel.
Name and location of the subroutine.
This subroutine must be defined in the general parameter REFPSUB (by default, sub_ref.nc)
and saved in the folder ..\Mtb\Sub. If there are several channels, there may be a different
subroutine for each channel.
Meaning.
CHN Subroutine associated with function G74.
14.
CNC 8060
CNC 8065
(R : 1709)
EF
·629·