Shared Plc Memory - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
2.3.24

Shared PLC memory.

PLCDATASIZE
Size of the PLC's shared data area.
Possible values: From 0 to 500.000 bytes.
Default value: 0.
Associated variable: (V.)MPG.PLCDATASIZE
This parameter may be used to define a memory area to exchange data between a PLC
program written in C language and an external application.
2.3.25 Management of local I/O.
NLOCOUT
Number of local digital outputs.
Possible values: From 0 to 8.
Default value: 0.
Associated variable: (V.)MPG.NLOCOUT
The central unit has set of 8 local digital signals, identified as LI/O1 through LI/O8, that may
be configured both as input and output. This parameter indicates how many of these signals,
starting with LI/O1, are configured as digital outputs; the rest of the signals will act as digital
inputs. The following table shows the logict numbers of pins LI/O1-LI/O8 according to
parameter NLOCOUT.
Pin. NLOCOUT
8
LI/O8 O8
LI/O7 O7
LI/O6 O6
LI/O5 O5
LI/O4 O4
LI/O3 O3
LI/O2 O2
LI/O1 O1
For the PWM and synchronized switching, only local outputs associated with pins LI/O1 and
LI/O2 may be used because they have been set for Laser applications. That requires setting
parameter NLOCOUT = 8.
EXPSCHK
Activate the 24 V monitoring at the local digital outputs.
Possible values: ON / OFF.
Default value: ON.
Associated variable: (V.)MPG.EXPSCHK
When a local digital output is active, the connector must be supplied with 24 V DC. This
parameter enables the detection of these 24 V at the connector.
The 24 V monitoring must be active when a local output has been set; if no local digital output
is active, the 24 V monitoring must be deactivated.
7 6 5 4
O7 O6 O5 O4
O6 O5 O4 O3
O5 O4 O3 O2
O4 O3 O2 O1
O3 O2 O1 I12
O2 O1 I11 I11
O1 I10 I10 I10
I9 I9 I9 I9
3 2 1 0
O3 O2 O1 I16
O2 O1 I15 I15
O1 I14 I14 I14
I13 I13 I13 I13
I12 I12 I12 I12
I11 I11 I11 I11
I10 I10 I10 I10
I9 I9 I9 I9
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·103·