Leadscrew Error Compensation - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
2.5.25

Leadscrew error compensation.

LSCRWCOMP
Leadscrew error compensation.
Parameter valid for linear and rotary axes and spindles.
Parameter valid for analog drive, Sercos and simulated.
Possible values: Yes / No.
Default value: No.
Associated variable: (V.)[ch].MPA.LSCRWCOMP.xn
This parameter indicates whether the axis uses leadscrew error compensation or not.
LSCRWDATA
Leadscrew compensation table.
Parameter valid for linear and rotary axes and spindles.
Parameter valid for analog drive, Sercos and simulated.
This parameter shows the table to define the leadscrew error compensation. The table shows
the following parameters to configure it.
LSCRWDATA
NPOINTS
TYPLSCRW
BIDIR
REFNEED
DATA
NPOINTS
Number of points in the table.
Parameter valid for linear and rotary axes and spindles.
Parameter valid for analog drive, Sercos and simulated.
Possible values: From 0 to 1000.
Default value: 0 (there is no table).
Associated variable: (V.)[ch].MPA.NPOINTS.xn
Parameter included in the LSCRWCOMP table.
The leadscrew error compensation table can have up to 1000 points.
TYPLSCRW
Type of compensation (type of coordinates).
Parameter valid for linear and rotary axes and spindles.
Parameter valid for analog drive, Sercos and simulated.
Possible values: Real / Theoretical.
Default value: Real.
Associated variable: (V.)[ch].MPA.TYPLSCRW.xn
Parameter included in the LSCRWCOMP table.
This parameter determines whether the leadscrew error compensation will be applied on to
theoretical or real coordinates.
BIDIR
Bi-directional compensation.
Parameter valid for linear and rotary axes and spindles.
Parameter valid for analog drive, Sercos and simulated.
Possible values: Yes / No.
Default value: No.
Associated variable: (V.)[ch].MPA.BIDIR.xn
Parameter included in the LSCRWCOMP table.
This parameter indicates whether the compensation is bidirectional or not; i.e. if the
compensation is different in each direction. If the compensation is not bidirectional, it applies
the same compensation in both directions.
Number of points in the table.
Type of compensation.
Bi-directional compensation.
Home search required for compensation.
Table to define the compensation values.
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·185·