Version History - Cnc 8065 - Fagor CNC 8060 Installation Manual

VERSION HISTORY - CNC 8065

Here is a list of the features added to each manual reference.
Ref. 1103
Software V04.20
First version.
Ref. 1201
Software V04.21
New model LCD-10K.
Software V04.22
Set the zero offsets with a coarse part and a fine part.
Cancel mirror image (G11/G12/G13/G14) after M30 and reset.
Set the feedrate displaying format (integers and decimals).
Set the spindle speed displaying format (integers and decimals).
Backlash peak cuttoff distance.
Hysteresis for applying the additional command pulse in movement reversals.
Ref. 1209
Software V04.24
Additional negative command pulse for analog axes.
The SPDLEREV mark also reverses the spindle turning direction in M19.
The default format for displaying the feedrate is 5.2.
The feedrate display format accepts 0.0.
The spindle speed display format accepts 0.0.
Dynamic distribution of the machining operations between channels. Both
options use the same PLC marks.
Leadscrew error compensation tables. The machine reference point, whose
position is indicated in parameter REFVALUE, may have any value.
Ref. 1301
Software V04.25
Synchronized switching.
HSC mode. The filter used by parameter HSCFILTERFREQ was IIR and it is
now FIR.
HSC mode. The units of parameter FTIMELIM were milliseconds and are now
percentage.
When OEM subroutines have the .fst extension, the CNC will load them into
RAM memory on power-up.
Error programmed in HSC mode.
In s t al lat i on m a nu al .
• Machine parameters: JOGKEYDEF n
USERKEYDEF n
• Variables: (V.)MPMAN.JOGKEYDEF[jk]
(V.)MPMAN.USERKEYDEF[uk]
• Machine parameter: FINEORG
• Variables: (V.)A.ADDORG.xn
(V.)A.COARSEORG.xn
(V.)A.FINEORG.xn
(V.)A.COARSEORGT[nb].xn
(V.)A.FINEORGT[nb].xn
• Machine parameter: MIRRORCANCEL
• Machine parameter: FFORMAT
• Machine parameter: SFORMAT
• Machine parameter: PEAKDISP
• Machine parameter: REVEHYST
• Machine parameters: BAKANOUT
• Machine parameters: M19SPDLEREV
• PLC signal: SPDLEREV
• Machine parameter: FFORMAT
• Machine parameter: FFORMAT
• Machine parameter: SFORMAT
• PLC signal: DINDISTC1
DINDISTC2
DINDISTC3
DINDISTC4
• Machine parameters: SWTOUTPUT
SWTDELAY
• Variables: (V.)G.TON
(V.)G.TOF
(V.)G.PON
(V.)G.POF
• Machine parameter: HSCFILTERFREQ.
• Machine parameter: FTIMELIM.
• Variable: (V.)G.CONTERROR
CNC 8060
CNC 8065
(R : 1709)
EF
·27·