Summary Programming Commands - Fagor CNC 8060 Installation Manual

4.6
4.
CNC 8060
CNC 8065
(R : 1709)
EF
·374·

Summary programming commands.

Resources available at the PLC.
Inputs (I1··1024)
Outputs (O1··1024)
Marks (M1··8192)
Message marks (MSG1··1024)
Error marks (ERR1··1024)
Clocks (CLK)
CNC-PLC marks
Timers (T1··512)
Counters (C1··256)
Registers (R1··1024)
CNC-PLC registers
The register value may be treated as a decimal or hexadecimal ("S") number.
It is also possible to refer to a register bit using the letter B (0··31) R (1··1024).
Clock Time
CLK1 1 ms
CLK2 2 ms
CLK4 4 ms
CLK8 8 ms
CLK16 16 ms
CLK32 32 ms
CLK64 64 ms
CLK128 128 ms
Directing instructions.
PRG Main module
PE t Periodic module. It is executed every "t" milliseconds.
CY1 First Cycle module.
END End of module.
L Label.
SUB Subroutine definition.
DEF: Symbol definition.
PDEF External symbol definition.
REA The consultations will use real values.
IMA The consultations will use image values.
NOMONIT No PLC program monitoring.
EXTERN External subroutine definition.
Clock Time
CLK100 100 ms
CLK200 200 ms
CLK400 400 ms
CLK800 800 ms
CLK1600 1.6 s
CLK3200 3.2 s
CLK6400 6.4 s
CLK12800 12.8 s
I n s ta ll a t io n ma n u a l.
Clock Time
CLK1000 1 s
CLK2000 2 s
CLK4000 4 s
CLK8000 8 s
CLK16000 16 s
CLK32000 32 s
CLK64000 64 s
CLK128000 128 s