Machine Parameters For The M Function Table - Fagor CNC 8060 Installation Manual

2.8
2.8.1
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·252·

Machine parameters for the M function table.

M function table.
MTABLESIZE
Number of table elements.
Possible values: from 0 to 200.
Default value: 50.
Associated variable: (V.)MPM.MTABLESIZE
This parameter indicates the number of M functions to be defined in the table. Each function
may be assigned a subroutine and defined the type of synchronization.
It must be borne in mind that some auxiliary functions, besides what is indicated in this table,
have a specific meaning when used in a CNC program. These functions are M00, M01, M02,
M03, M04, M05, M06, M08, M09, M19, M30, M41, M42, M43 and M44.
DATA
M function table.
It shows the "M" function setting table. The following fields must be defined for each M
function.
DATA
MNUM M function number.
SYNCHTYPE Type of synchronism.
MPROGNAME Name of subroutine associated with M function.
MTIME Estimated time for an M function.
MPLC Send the M function to the PLC during block search.
COMMENT Description of the M function.
MNUM
M function number.
Possible values: from 0 to 65535.
Associated variable: (V.)MPM.MNUM[pos]
Parameter included in the DATA table.
This parameter indicates the number of the M function.
SYNCHTYPE
Type of synchronization.
Possible values: Without synchronization / Before-Before / Before-After / After-After.
Default value: Before - Before.
Associated variable: (V.)MPM.SYNCHTYPE[pos]
Parameter included in the DATA table.
Since the M functions may be programmed together with the movement of the axes, in the
same block, it must be indicated when the function is to be sent out to the PLC and when
it will be checked that it has been already executed (synchronization).
Type of synchronism.
Without synchronization.
Before - Before.
Before - After.
After - After.
Meaning.
M function not synchronized.
The M function is sent to the PLC and synchronized before the
movement.
The M function is sent to the PLC before the movement and
synchronized after the movement.
The M function is sent to the PLC and synchronized after the
movement.
I n s ta ll a t io n ma n u a l.