Linear Acceleration (G0 Movements) - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
2.6.11

Linear acceleration (G0 movements).

LACC1G0
Acceleration of the first section (G0 movements).
Parameter valid for linear and rotary axes and spindles.
Parameter valid for analog drive, Sercos and simulated.
Possible values (1): From 0.0000 to 600000000.0000 mm/s².
Possible values (2): From 0.00000 to 23622047.24409 inch/s².
Possible values (3): From 0.0000 to 600000000.0000 degrees/s².
Default value: 1000.0000 mm/s² / 39.37008 inch/s² / 1000.0000 degrees/s².
Associated variable: (V.)[ch].MPA.LACC1G0[set].xn
See parameter LACC2G0.
LACC2G0
Acceleration of the second section (G0 movements).
Parameter valid for linear and rotary axes and spindles.
Parameter valid for analog drive, Sercos and simulated.
Possible values (1): From 0.0000 to 600000000.0000 mm/s².
Possible values (2): From 0.00000 to 23622047.24409 inch/s².
Possible values (3): From 0.0000 to 600000000.0000 degrees/s².
Default value: 1000.0000 mm/s² / 39.37008 inch/s² / 1000.0000 degrees/s².
Associated variable: (V.)[ch].MPA.LACC2G0[set].xn
Parameters LACC1G0 and LACC2G0 set the acceleration values when it is linear
(parameter SLOPETYPE) or when working with HSC in FAST mode. The CNC applies
parameters LACC1G0 and LACC2G0 to G0 movements.
LFEEDG0
Acceleration changing speed (G0 movements).
Parameter valid for linear and rotary axes and spindles.
Parameter valid for analog drive, Sercos and simulated.
Possible values (1): From 0 to 200000.0000 mm/min.
Possible values (2): From 0 to 7874.01575 inch/min.
Possible values (3): From 0 to 36000000.0000 degrees/min.
Possible values (4): From 0 to 100000.0000 rpm.
Default value: 3000 mm/min / 118.11023 inch/min / 1080000 degrees/min / 3000 rpm.
Associated variable: (V.)[ch].MPA.LFEEDG0[set].xn
While accelerating, when reaching the feedrate defined in this parameter, it changes the
acceleration from LACC1G0 to LACC2G0. While decelerating, when reaching the feedrate
defined in this parameter, it changes the acceleration from LACC2G0 to LACC1G0.
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·213·