Variables - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
12.2

Variables.

12.2.1 Variables. General; machine parameters.
(V.)MPG.VMOVAXIS1[tbl]
(V.)MPG.VMOVAXIS2[tbl]
(V.)MPG.VMOVAXIS3[tbl]
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Basic volumetric compensation table [tbl]. Name of the axis that generates changes when
moved.
Syntax.
·tbl· Table number.
V.MPG.VMOVAXIS2[1]
(V.)MPG.NPOINTSAX1[tbl]
(V.)MPG.NPOINTSAX2[tbl]
(V.)MPG.NPOINTSAX3[tbl]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Basic volumetric compensation table [tbl]. Number of points of basic volumetric
compensation on each axis.
Syntax.
·tbl· Table number.
V.MPG.NPOINTAX2[1]
(V.)MPG.INIPOSAX1[tbl]
(V.)MPG.INIPOSAX2[tbl]
(V.)MPG.INIPOSAX3[tbl]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Basic volumetric compensation table [tbl]. Initial position of the basic volumetric
compensation on each axis.
Syntax.
·tbl· Table number.
V.MPG.INIPOSAX2[1]
(V.)MPG.INCREAX1[tbl]
(V.)MPG.INCREAX2[tbl]
(V.)MPG.INCREAX3[tbl]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Interval between basic volumetric compensation points on each axis.
Syntax.
·tbl· Table number.
V.MPG.INCREAX2[1]
Name of the second axis on the first volumetric
compensation table.
Number of points from the first basic volumetric
compensation on the second axis.
Initial position of the first basic volumetric compensation
on the second axis.
Interval between points from the first basic volumetric
compensation on the second axis.
12.
CNC 8060
CNC 8065
(R : 1709)
EF
·593·