Graphics Configuration - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
2.11.7

Graphics configuration.

GRAPHTYPE
List of graphics in each channel.
On the lathe model, this parameter shows the table to define the configuration of the graphics
in each channel.
GRAPHTYPE
GRAPHTYPECH n
GRAPHTYPECH n
Type of graphics in each channel.
Possible values: Horizaontal or vertical lathe; X+ Z+ / X- Z+ / X+ Z- / X- Z-.
Default value: Horizontal X+ Z+.
Parameter included in the GRAPHTYPE table.
In the lathe model, this parameter sets the configuration of the graphics of the channel.
Horizontal lathe.
X+
Vertical lathe.
Z+
It is also possible to display the graphics of a dual-turret lathe (TT lathe). To do that, use the FGUIM
application to change the Channel1 and Channel2 properties of the graphics window to display the
execution of both channels on a single graphics.
DIAGPSW
(Reserved)
Type of graphics in each channel.
Z+
Z-
Z+
X-
Z+
X+ X-
Z-
X+
Z-
X-
X+ X-
Z-
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·313·