Oem Subroutines Associated With Functions G180 To G189 / G380 To G399 - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
14.12 OEM subroutines associated with functions G180 to G189 / G380
to G399.
The CNC allows the machine manufacturer to define up to 30 subroutines per channel and
associate them with functions G180 through G189 and G380 through G399 in such a way
that when a channel executes one of these functions, it will execute the associated
subroutine. These OEM subroutines may be executed either in a non-modal or modal way
and it also allows resetting the local parameters of the subroutine.
14.12.1 Configure the subroutines.
Assign the subroutines to the functions.
Parameter.
OEMSUB (G180)
··
OEMSUB (G189)
OEMSUB (G380)
··
OEMSUB (G399)
[CHN] ....... General machine parameter of the channel.
Name and location of the subroutine.
These subroutines must be defined in the general parameters OEMSUB and saved in the
folder ..\Mtb\Sub. These subroutines can be loaded into RAM (extension fst).
14.12.2 Variables.
The following variables may be accessed from (PRG) the part-program and from the
MDI/MDA mode, PLC and (INT) from an external application. For each variable, the table
indicates whether the access is reading (R) or writing (W).
Variable.
(V.)[ch].MPG.OEMSUB1
··
(V.)[ch].MPG.OEMSUB10
OEM subroutines associated with functions G180 through G189.
Units: -.
(V.)[ch].MPG.OEMSUB11
··
(V.)[ch].MPG.OEMSUB30
OEM subroutines associated with functions G380 through G399.
Units: -.
Meaning.
CHN Subroutines associated with functions G180 through G189.
CHN Subroutines associated with functions G380 through G399.
PRG PLC INT
- - R
- - R
14.
CNC 8060
CNC 8065
(R : 1709)
EF
·631·