Software Update And Incompatibilities (8060) - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
1.3.1

Software update and incompatibilities (8060).

Version V1.31.01.
Apply or not tool radius compensation in G00.
In this version, movements in G00 do not apply tool radius compensation. This has been
corrected in later versions with parameter G00COMP.
Version V1.40.
New software option "third-party CANopen".
From this version one, if a machine is using some non-Fagor CANopen module, the CNC
will not recognize it and it will issue the corresponding error message when initializing the
CAN bus.
Extended scope of the software option "Probing canned cycles".
The software option "Probing canned cycles" is now called "Probe". From this version on,
functions G100, G101, G102, G103 and 104 need this software option.
1.
CNC 8060
CNC 8065
(R : 1709)
EF
·51·