Override Of The Dynamics For Hsc - Fagor CNC 8060 Installation Manual

I n s t a l l a t i o n m a n u a l .
2.4.11

Override of the dynamics for HSC.

MINDYNOVR
Minimum override for the dynamics in HSC.
Possible values: From 10 to 100 %.
Default value: 30 %.
Associated variable: (V.)[ch].MPG.MINDYNOVR
The screen of the automatic mode offers a slider for changing the dynamics defined by
program for an HSC machining operation. This parameter sets the minimum percentage to
be applied using the slider.
MAXDYNOVR
Maximum override for the dynamics in HSC.
Possible values: From 100 to 500 %.
Default value: 200 %.
Associated variable: (V.)[ch].MPG.MAXDYNOVR
The screen of the automatic mode offers a slider for changing the dynamics defined by
program for an HSC machining operation. This parameter sets the maximum percentage
to be applied using the slider.
2.4.12 Movement of the independent axes.
IMOVEMACH
Movement of the independent axis referred to machine
coordinates.
Possible values: Yes / No.
Default value: No.
Associated variable: (V.)[ch].MPG.IMOVEMACH
This parameter indicates whether the movements of the independent axes are referred to
machine coordinates (IMOVEMACH = YES) or to part coordinates (IMOVEMACH = NO),
before the coordinate transformations.
XFITOIND
The transfer inhibit of the channel affects the independent axes.
Possible values: Yes / No.
Default value: Yes.
Associated variable: (V.)[ch].MPG.XFITOIND
This parameter indicates whether the transfer inhibit of the channel (_XFERINH mark)
affects the movements of the independent axis programmed from the PLC or not. The
transfer inhibit of the channel always affects the movements of the independent axis
programmed from the CNC.
XFITOIND
Yes
No
Meaning.
The _XFERINH mark affects the movement of the independent axis programmed
from the PLC and from the CNC.
The _XFERINH mark does not affect the movements of the independent axis
programmed from the PLC; but it does affect the ones programmed from the
CNC.
2.
CNC 8060
CNC 8065
(R : 1709)
EF
·141·