Software configuration of your Matrix 120 for static reading or simple code
reading applications can be accomplished by the Rapid Configuration procedure
using the X-PRESS HMI (which requires no external configuration program). This
procedure is described in
For the majority of applications however you will use DL.CODE, connecting to the
reader through the on-board Ethernet interface. See
DL.CODE System Requirements
DL.CODE does not currently support Windows Embedded (often used in industrial PCs
and/or PLCs).
CAUTION
To install and run DL.CODE you should have a Laptop or PC that meets or
exceeds the following:
•
2.00 GHz or faster microprocessor
•
Windows: XP SP3, 7, 8, or 10
•
1 GB RAM
•
2 GB hard disk for 64-bit machines; 1 GB hard disk for 32-bit machines
•
100 Base-T Ethernet
•
One 19" or larger monitor (optimized for 1280x1024 resolution)
Product Reference Guide
Software Configuration
Chapter 1,
Steps 3-4.
Chapter 7
Chapter 1,
Steps 5-6.
119