Datalogic Handheld Data Format Requirements - Datalogic Magellan 9800i Product Reference Manual

Datalogic Handheld Data Format Requirements

The following sections describe label transmission formats that are typically observed in
factory configurations of Datalogic handheld scanners.
UPC-A
• Number system must be included in label data
• Check digit must be included in label data and is assumed to be correct
• Prefix must be an ASCII character 'A' - total length including prefix must be 13
• Example: 'A060992011187'
UPC-A with 2-Digit Supplemental
• Number system must be included in label data
• Check digit must be included in label data and is assumed to be correct
• Supplemental data is appended to base label
• Prefix must be an ASCII character 'A' - total length including prefix must be 15
• Example: 'A06099201118712'
UPC-A with 5-Digit Supplemental
• Number system must be included in label data
• Check digit must be included in label data and is assumed to be correct
• Prefix must be an ASCII character 'A' - total length including prefix must be 18
• Example: 'A06099201118712345'
UPC-A with Code128 Supplemental
• Number system must be included in label data
• Check digit must be included in label data and is assumed to be correct
• Supplemental data is appended to base label
• Prefix must be an ASCII character 'A' - total length including prefix must be greater or
equal to 19 (code 128 supplemental codes are variable length having a minimum of 2
data characters)
• Characters immediately following base label must be of the form '8100', '8101' or
'8102'
• Example: 'A0609920111878100000951'
UPC-E
• Number system must be included in label data
• Check digit must be included in label data and is assumed to be correct
• Prefix must be an ASCII character 'E' - total length including prefix must be 9
• Example: 'E09988750'
428 Magellan™ 9800i Scanner