Led And Beeper Indicators - Datalogic Magellan 3500HSi Quick Reference Manual

LED and Beeper Indicators

The scanner's beeper sounds and its green LED illuminates to indicate
various functions or errors on the scanner. The tables that follow list
these indications. An exception to the behaviors listed in the tables is
that the scanner's functions are programmable, and may or may not be
turned on. For example, some indications (such as the power-up beep)
can be disabled using programming bar code labels.
LED
INDICATION
Power-on
indication
Good Read
Indication
Scanner
Ready
Sleep Mode
Host Disable
Diagnostics
Prog. Mode
6
INDICATION
Constant dim green
Bright green flash
Constant dim green
The green LED
alternates from
brief blinks to lon-
ger dark periods,
repeating at about
0.5 Hz.
Constant green
flash at 1 Hz
(100mS on, 900mS
off)
Error
Varies (see
Codes on
page 9
for more
information)
Constant green
flash at 1 Hz (500
ms on, 500 ms off)
COMMENT
Indicates the scanner has finished all
its power-up tests and is now ready for
operation.
Indicates a bar code has been read and
decoded.
The scanner is ready for operation.
The scanner is in Sleep Mode. To wake
the scanner up, move an object in front
of its window or press the button atop
the unit. This indication is optionally
configurable, and may have been pro-
grammed to behave differently.
The scanner is disabled due to receiv-
ing a disable command from the POS
terminal.
The LED can provide diagnostic feed-
back if the scanner discovers a problem
during SelfTest.
The scanner is in Programming Mode.
Magellan™ 3500HSi