Led And Beeper Indicators - Datalogic MAGELLAN 3510HSi Quick Reference Manual

LED AND BEEPER INDICATORS

The scanner's beeper sounds and its green LED illuminates to indicate
various functions or errors on the scanner. The tables that follow list
these indications. An exception is that the scanner's functions are
programmable, and may or may not be turned on. For example, some
indications (such as the power-up beep) can be disabled using
programming bar code labels.
LED Indicators
LED INDI-
CATION
Power-up Constant bright
indication green
Good Read
Bright green flash
Indication
Scanner
Constant dim green The scanner is ready for operation.
Ready
Green LED flashes
every 2 seconds
Sleep Mode
(10mS on, 1990mS
off).
Constant green flash
Host Disable at 1 Hz (100mS on,
900mS off)
Varies (see
Codes" on page 10
Diagnostics
for more
information)
Constant green flash
Prog. Mode at 1 Hz (500 ms on,
500 ms off).
INDICATION
"Error
COMMENT
Indicates the scanner is running
power-up tests and is not yet ready for
operation.
Indicates a bar code has been read and
decoded.
The scanner is in Sleep Mode. To wake
the scanner up, move an object in front
of its window or press the Scanner
Button. This indication is optionally
configurable, and may have been
programmed to behave differently.
The scanner is disabled due to
receiving a disable command from the
POS terminal.
The LED can provide diagnostic
feedback if the scanner discovers a
problem during SelfTest.
The scanner is in Programming Mode.
LED and Beeper Indicators
QUICK REFERENCE GUIDE 7