Led And Beeper Indicators - Datalogic Magellan 3200VSi Product Reference Manual

LED and Beeper Indicators

The scanner's beeper sounds and its green LED illuminates to indicate various functions
or errors on the scanner. The tables below list these indications. One exception to the
behaviors listed in the tables is that the scanner's functions are programmable, and may
or may not be turned on. For example, certain indications, such as the power-up beep
can be disabled using programming bar code labels.
Green LED Indications
LED
INDICATION
Power-on
Bright green flash
indication
Good Read
Bright green flash
Indication
Scanner Ready Constant dim green
Green LED slowly and continu-
Sleep Mode
ously changes from off to dim to off.
Constant green flash at 1 Hz
Host Disable
(100mS on, 900mS off)
Varies (see
Diagnostics
page 1-4 for more information)
Prog. Mode See
Host Disable
BEEPER FUNCTIONS
BEEPER
INDICATION
Power On Beep Single beep
Good Read
Single beep
Indication
Varies (see
Diagnostics
page 1-4 for more information)
Product Reference Guide
INDICATION
"Error Codes" on
above.
INDICATION
"Error Codes" on
COMMENT
Indicates the scanner has finished all its power up tests and
is now ready for operation.
Indicates a bar code has been read and decoded.
The scanner is ready for operation. The LED is also configu-
rable to off when idle and ready for operation
The scanner is in Sleep Mode. To wake the scanner up,
move an object in front of its window or press the button atop
the unit. This indication is optionally configurable and may
have been programmed to behave differently.
The scanner is disabled due to receiving a disble command
from the POS terminal.
The LED can provide diagnostic feedback if the scanner dis-
covers a problem during SelfTest.
The scanner is in Programming Mode.
COMMENT
The Power-On Beep indication is a configurable feature which
can be enabled or disabled. When enabled, this beep Indi-
cates the scanner has finished all its power up tests and is
now ready for operation.
The good read beep indication is configurable. Options
include: Enable/disable, frequency, duration and volume. See
LED and Beeper Indicators on page 23
The Beeper can provide diagnostic feedback if the scanner
discovers a problem during SelfTest.
LED and Beeper Indicators
for more information.
7