Camera Button; Led And Beeper Indicators - Datalogic Magellan 3400VSi Quick Reference Manual

Camera Button

The Camera Button provides the unit with the ability to capture
images. See Camera Button Mode on page 12
ture. Destination and image type can be specified. Reference the
PRG for additional information and programming options.

LED and Beeper Indicators

The scanner's beeper sounds and its green LED illuminates to
indicate various functions or errors on the scanner. The tables
that follow list these indications. An exception is that the scan-
ner's functions are programmable, and may or may not be turned
on. For example, some indications (such as the power-up beep)
can be disabled using programming bar code labels.
LED
INDICATION
Power-on
Bright green flash
indication
Good Read
Bright green flash
Indication
Scanner Ready Constant dim green
Green LED slowly and
Sleep Mode continuously changes
from off to dim to off.
Constant green flash
Host Disable at 1 Hz (100mS on,
900mS off)
Varies (see
Diagnostics Codes on page 9
more information)
Constant green flash
Prog. Mode at 1 Hz (500 ms on,
500 ms off).
6
INDICATION
Error
for
to enable this fea-
COMMENT
Indicates the scanner has finished all its
power-up tests and is now ready for
operation.
Indicates a bar code has been read and
decoded.
The scanner is ready for operation.
The scanner is in Sleep Mode. To wake the
scanner up, move an object in front of its
window or press the button atop the unit.
This indication is optionally configurable,
and may have been programmed to
behave differently.
The scanner is disabled due to receiving a
disable command from the POS terminal.
The LED can provide diagnostic feedback
if the scanner discovers a problem during
SelfTest.
The scanner is in Programming Mode.
Magellan™ 3400VSi