Qr Code Length 1, Length 2 Programming Instructions - Datalogic Magellan 3200VSi Product Reference Manual

QR Code — cont.

QR Code Length 1, Length 2 Programming Instructions

1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to
Scan the END bar code.
START / END
DEFAULT SETTING FOR THIS FEATURE: 0001
Set Length 2
Product Reference Guide
Appendix C, Alpha-Numeric Pad
the length.
For 2d Code labels, only the data characters are included in the length
calculations.
Any value set higher than 2710 will be considered to be 2710.
NOTE
PROGRAMMING bar codes
and scan the four digits (zero-padded) representing
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 2710
2D Symbologies
139