Micro Qr Code Length Control; Configuring Variable Length Decoding - Datalogic Magellan 1500i Product Reference Manual

Enter/Exit Programming Mode

Micro QR Code Length Control

Fixed Length Decoding —
will decode a barcode if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding —
ner will decode a ar code if the label length falls in the range of the configurable
minimum and maximum length.
Configuring Fixed Length Decoding:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the Fixed Length Decoding barcode.
3. Scan the Enter/Exit Programming Mode barcode at the top of the page.
4. Set Length 1 to the first fixed length using the
5. Set Length 2 to the second fixed length (or to '0000' if there is only one

Configuring Variable Length Decoding:

1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the Variable Length Decoding barcode.
3. Scan the Enter/Exit Programming Mode barcode at the top of the page.
4. Set Length 1 to the minimum length using the
5. Set Length 2 to the maximum length using the
DEFAULT
042A01(CR)
Micro QR Code Length Control = Fixed Length
268
When fixed length decoding is enabled, the scanner
Length 2 Programming Instructions on page 269
fixed length) using the
Instructions on page
Length 2 Programming Instructions on page 269
Length 2 Programming Instructions on page
When variable length decoding is enabled, the scan-
Micro QR Code Length 1, Length 2 Programming
269.
042A00(CR)
Micro QR Code Length Control = Variable Length
Micro QR Code Length Control
Micro QR Code Length 1,
that follow this page.
Micro QR Code Length 1,
that follow this page.
Micro QR Code Length 1,
269.
Magellan™ 1500i