Step 5 - Installing Dl.code Configuration Program - Datalogic Matrix 300N Series Product Reference Manual

STEP 5 - INSTALLING DL.CODE CONFIGURATION PROGRAM

CAUTION
DL.CODE is a Datalogic reader configuration tool providing several important advan-
tages:
•
•
•
•
To install DL.CODE:
1. On the PC that will be used for configuration (running Windows 7, 8.1, or 10), down-
NOTE
2. When the installation is complete, the DL.CODE entry is created in the Start>Pro-
This configuration procedure assumes a laptop computer running DL.CODE is connected
to a factory default reader through the Ethernet port.
DL.CODE does not currently support Windows Embedded (often used in
industrial PCs and/or PLCs).
Intuitive Graphical User Interface for rapid configuration
Defined configuration directly stored in the reader
Discovery and IP address setting features to facilitate remote configuration
Device Monitoring
load the DL.CODE mini-DVD.zip file. Extract the files maintaining the folder structure
and run the start.hta file to access the installation pop-up. Click on the Install
DL.CODE link to run the installation program and follow the installation procedure.
To perform a "silent" installation (without user input), see the DL.CODE
User's Guide.
grams bar under "Datalogic" as well as a desktop icon. Double-click the desktop
icon to run it.
STEP 5 - INSTALLING DL.CODE CONFIGURATION PROGRAM
PRODUCT REFERENCE GUIDE
9