Code 128 Transmit Function Characters
Enables/disables transmission of Code 128 function characters 1, 2, 3, and 4.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any unused barcodes
on this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
DEFAULT
02C701(CR)
Code 128 Transmit Function Characters = Enable
Product Reference Guide
Disabled is the recommended setting for all interfaces.
NOTE
Enter/Exit Programming Mode
02C700(CR)
Code 128 Transmit Function Characters = Disable
309