Code 128 Transmit Function Characters
NOTE
Product Reference Guide
Enables/disables transmission of Code 128 function characters 1, 2,
3, and 4.
Disabled is the recommended setting for all interfaces.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need
to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CODE 128 TRANSMIT FUNCTION CHARACTERS = DISABLE
CODE 128 TRANSMIT FUNCTION CHARACTERS = ENABLE
Code 128 Enable
379