Code 128 Family - Datalogic TC1100 Reference Manual

Enter configuration
Read the desired family code
Code EAN 128 uses the ASCII <GS> character to separate a variable length code field from the
next code field. This character can also be added before the code.
If the <GS> character has been modified in the Character Replacement parameter, the new
character is affected by this command.
CODE SELECTION
C 128 F
ODE AMILY
disable the family
Code 128
control without transmission
of check digit
EAN 128
control without transmission
of check digit
Add GS Before Code
disable
enable
Exit and Save Configuration
91