Configuring The Tsq 8000 Evo System - Thermo Scientific TSQ 8000 Evo Hardware Manual

1
Performing Routine Maintenance

Configuring the TSQ 8000 Evo System

Configuring the TSQ 8000 Evo System
4 TSQ 8000 Evo Hardware Manual
When you receive your TSQ 8000 Evo system, a Field Service Engineer will configure the
system for you. However, if you need to reconfigure your system, follow these steps:
1. Place the TSQ 8000 Evo instrument, GC, computer, monitor, and keyboard on a work
table and the foreline pump on the floor underneath.
Note If you are using CI, connect the reagent gas tubing to one of the Reagent Gas
Connectors on the TSQ 8000 Evo instrument.
Figure 1. Configuring the TSQ 8000 Evo System
Power Switch
Optional Mech
Pump
Connection
AC Input
Connector
Collision Gas
Intake
Accessory Start
Connector
GC Start
Connector
System Mech Pump
Connection
Data System Connector
Reagent Gas (A & B) Connectors
Thermo Scientific