Replacing Components Of The Electron Multiplier - Thermo Scientific TSQ 8000 Evo Hardware Manual

Replacing Components of the Electron Multiplier

Figure 256. Replaceable Components of the Electron Multiplier
Large Feedthroughs
Anode Feedthrough
O-Rings
Thermo Scientific
If the components of your electron multiplier get damaged, you can use the illustration below
to visually locate a component and then follow the process to replace it.
Note See the TSQ 8000 Evo Spare Parts Guide for information about ordering this
component.
For information about replacing the electron multiplier, see
Multiplier. The electron multiplier is replaced more frequently than the other components, so
it is described in Chapter 2: Performing Routine
3
Advanced Troubleshooting
Replacing Components of the Electron Multiplier
Electron Multiplier
Plate
Electron Multiplier
Replacing the Electron
Maintenance.
TSQ 8000 Evo Hardware Manual 237