Thermo Scientific TSQ 8000 Evo Hardware Manual page 283

Thermo Scientific
Figure 274. Finding the Inputs and Screws on the Left Hand Sub Panel
Optional Mech
Pump
Connection
AC Input
Connector
Collision Gas
Intake
Accessory Start
Connector
GC Start
Connector
Screw
4. Remove the three screws on the left hand sub panel.
5. Replace the left hand sub panel and tighten the three screws holding it in place.
6. Replace the inputs.
7. Replace the left hand front panel and tighten the four screws holding it in place.
8. Restart your system by following the instructions in
Replacing the Covers of the TSQ 8000 Evo Instrument
Screw
System Mech Pump
Connection
Data System Connector
3
Advanced Troubleshooting
Reagent Gas Connectors
Screw
"Restarting the System" on
TSQ 8000 Evo Hardware Manual
page 120.
257