Thermo Scientific TSQ 8000 Evo Hardware Manual page 67

Thermo Scientific
4. Place lens 2 on top of lens 3/RF lens with the small hole facing down. It should fit snugly
and sit evenly on top of lens 3/RF lens.
Figure 33. Inserting Lens 2 into the Source Sleeve
5. With the longer teeth of lens 1 facing down toward lens 2, align the larger metal section
of lens 1 with the sleeve window and let it fall into place.
Figure 34. Inserting Lens 1 into the Source Sleeve
Sleeve
Window
Larger Metal
Section
1
Performing Routine Maintenance
Removing the Ion Source Cartridge for Cleaning
Small Hole of
Lens 2
Longer Teeth
of Lens 1
TSQ 8000 Evo Hardware Manual 41