Thermo Scientific TSQ 8000 Evo Hardware Manual page 369

Thermo Scientific
Figure 366. Opening the Manifold Door
7. Open the manifold door.
8. Disconnect the calibration and reagent gas tubes from the gas mixing chamber.
9. Remove the screw on the lower right side that is holding the analyzer tray to the manifold.
Figure 367. Disconnecting the Analyzer Tray from the Instrument
3
Advanced Troubleshooting
Replacing the Calibration Gas Components
Screws
TSQ 8000 Evo Hardware Manual
Gas Mixing
Chamber
Calibration
and Reagent
Gas Tubes
Right
Screw
343