Thermo Scientific TSQ 8000 Evo Hardware Manual page 194

3
Advanced Troubleshooting
Replacing Components of the Ion Source
168 TSQ 8000 Evo Hardware Manual
8. Slide the source interface board and source block onto the tray without damaging or
disconnecting the wires.
Figure 156. Sliding the Ion Source Block onto the Analyzer Tray
9. Reattach the two screws to the back of the source block.
Figure 157. Reconnecting the Ion Source to the Analyzer Tray
Screws
IMPORTANT When assembling the source and optics block, take extra care to ensure the
blocks are centered properly and that the ion source cartridge provided with the
instrument can easily slide in and out of the assembly.
Wires
Source
Interface
Board
Source Block
Thermo Scientific