3
Advanced Troubleshooting
Replacing the Boards in the TSQ 8000 Evo Instrument
306
TSQ 8000 Evo Hardware Manual
the TSQ 8000 Evo instrument. Use a T20 Torxhead screwdriver to remove the screws
holding the board and brackets to the chassis.
Figure 329. Locating the RF Boards and Brackets
.
18. To remove the front RF board, use your fingers to pry the brackets of the board away
from the chassis and toward the left side of the instrument.
19. Lift the board out of the instrument.
Rear RF
Board
Screws
Brackets
Front RF
Board
Thermo Scientific