Thermo Scientific TSQ 8000 Evo Hardware Manual page 172

3
Advanced Troubleshooting
Replacing Components of the Ion Source
146 TSQ 8000 Evo Hardware Manual
14. Use a T20 Torxhead screwdriver to remove the two screws connecting the lens/source
heater to the source heater block. Replace the lens/source heater if necessary.
Figure 125. Disconnecting the Lens/Source Heater
15. Remove and replace the source heater block if necessary.
Figure 126. Replacing the Source Heater Block
Lens/Source
Heater
Screws and
Cone Washers
Source Heater
Block
Thermo Scientific