Thermo Scientific
Figure 299. Locating the RF Boards and Brackets
.
7. Use your fingers to pry the bracket of the board away from the chassis and toward the left
side of the instrument.
8. Lift the board out of the instrument.
9. Remove the large glass manifold cover.
10. Set the glass cover on a surface where it will not be scratched or contaminated. Protect the
glass and any other manifold components from dust accumulation. Wear cleanroom
gloves when touching the glass. See the TSQ 8000 Evo Spare Parts Guide for information
about ordering cleanroom gloves.
Replacing the Boards in the TSQ 8000 Evo Instrument
Rear RF
Front RF
Board
Board
Brackets
TSQ 8000 Evo Hardware Manual
3
Advanced Troubleshooting
279